Whether you’re plotting out an expansive gallery wall amp underpinner or hanging a single piece of affordable artwork, it’s a relatively easy task the average homeowner can take on themselves. There are no power tools necessary — typically just a hammer, a nail, and a level.

But there are a few things you should know before you drive anything into drywall, plaster, or even brick — like what kind of hardware to use, how to choose the right height, and how to find a wall stud. The advanced planning is well worth the effort: It will save you from putting unnecessary holes in the wall, a mistake that can cost you both time and money.

1. Consider the wall surface

Drywall: If the wall you’re working with is made from drywall FramewareLLC, you’re in luck — this is the easiest material to work with, since it’s an easy material to penetrate. Just be sure to locate a wall stud, since hanging directly on drywall won’t provide a secure anchor. If a solid stud isn’t available, it’s important to use a drywall anchor to hang pictures.

Plaster: These walls (often found in older homes) are a little trickier, as they have a tendency to crumble. Approach the process same way you would when working with drywall: Look for a wall stud for the most secure anchor. Just note that when hanging pictures on a plaster wall, it’s always a good idea to pre-drill your hole. To prevent crumbling, place a piece of painter’s tape on the wall before drilling.

Brick: If your walls are brick, you’ll need to use a wall anchor. And use a masonry bit on your drill to drill into mortar, not the actual brick.

2. Choose your hanging hardware

If you’ve ever looked at the back of a picture frame, you know there are multiple hardware options, including D-rings, sawtooth hangers buy hangers in bulk, and wire. Some frames even come with more than one option. So which one should you choose? The short answer: It depends on what method you’re most comfortable with. Here, a few options:

MORE FROM GOOD HOUSEKEEPING

How to Clean a Washing Machine

How to hang a picture with a nail: A single nail can likely do the trick and is easiest method if the frame comes with a hook or sawtooth hanger, says Rachel Rothman, chief technologist and director of engineering at the Good Housekeeping Institute. This method also leaves the least amount of damage in its wake, since simple nail holes can be as small as pin dots. Driving the nail into a wall stud will offer the most support, especially for anything above about five pounds. Just be sure to drive the nail in at a degree angle, says Rothman.

How to hang a picture with wire: For greater stability, consider hanging your picture with a wire suspended between two D-rings opposite each other, says Rothman. The process is the same as it is when hanging a picture with nails, just two-fold.

And how to hang a picture without nails: If you’re hesitant to make any holes in your walls, adhesive-backed picture hooks and strips are great options for lighter frames. (Check the manufacturer’s specifications, but these options typically max out around 15 pounds, says Rothman.) These products are also great for plaster and brick surfaces, since these wall materials are more prone to crumbling and cracking.

3. Measure the ideal height

To measure the right height like a pro, memorize this fact: Eye level is approximately 57 to 60 inches from the floor, says Rothman. Since the middle of the painting should sit at this height, you’ll need to do a little bit of math to get it just right. Our GHI pro tip: Take the height of the frame, divide it by two, subtract the distance from the top of the frame to the hardware, then add 60.

4. Make sure it’s perfectly level

Once you confirm the height at which you’ll hang your picture, use a pencil to mark the wall. If you’re using a wire or more than one hook, use a level to ensure the marks are at the same height, says Rothman. If the room slopes, feel free to cheat a bit to make it look straight.

5. Finally, hang your picture

Now, you can finally put your decor on the wall. Once secure on the wall, use a level one more time, tweaking as necessary, to ensure everything is just right.

Children Party Invitations can be testing when it pertains to the mix and suit of colors and prints that are available. You may assume that it is impossible to get them right however you will locate that there are some things that you need to do in order to - make certain that your invites look wonderful. There needs to be something for everybody amongst these numerous mixed design welcomes. Many people have tried and a lot of have stopped working to cover as lots of age as feasible with their welcomes.

There are great deals of various suggestions to cover as lots of age as feasible with your welcomes. Among one of the most preferred is the double C word that includes both numbers 1 and 2 together. This is a preferred youngsters celebration invites wording suggestion and can quickly be done by hand or by printing on. This is one more alternative that can quickly be done without much trouble.

One more alternative that is preferred is making use of the youngster’s birthday cake or cupcakes. These can quickly be made use of as the base for the youngsters celebration invites. If you have a unique cake that you wish to include on the welcomes, after that you can get the invites printed with the cake style on the front and afterwards detail the various cakes that you have for the visitors to pick from on the back. This will give them an suggestion of the various selections that they have and enable them to make a decision much easier. When it pertains to the youngsters celebration invites wording, you can have fun with it. There is no established formula, however if you take a couple of simple words that explain the motif of the celebration and use them in the invite you will have great deals of fun. The invite can additionally be themed around the activities or video games that you are having for the birthday. For instance, if you are having a - witch hunt for the little one’s third party, you could compose on the welcomes that the finder of the treasure is: Miss Mom and Miss Dad, which they are looking for the adhering to products: a packed monkey, a gold coin, a necklace, a heart-shaped box, a pirate flag, a princess’ round, and other such products.

Often it is nice to let the youngsters articulate their opinions on the birthday invites that they get. If they really feel that something is a little odd after that it could be worth thinking about transforming it. Obviously, it is additionally vital to consider the age of the youngster and his/her point of view on the issue. You do not wish to disturb your little one and still send out youngsters celebration invites to the occasion.

Finally, do not disregard the vital elements such as the color pattern, decorations, and table placements when you are intending the celebration. All of these things will substantially affect the total allure of the celebration. There is nothing even worse than having a wonderful looking - venue, embellished to an exceptional criterion, however have a poor decorating task. The children’s initial birthday celebration invites ought to be sent out in good taste, with some thought and consideration for their tastes. This ought to all be taken into consideration prior to sending the invites to the celebration.

Though some homes also have names, every houses are generally identified by their home number for government property records. Hence domestic owners should ensure that their home number is easily visible, so that visitors and others can come across the home easily. While plastic and metal signs can be used for home numbers these are not durable or may secure corroded after some time since they are placed outdoors. Hence increasingly domestic owners are preferring to spend Talavera House Number Tiles for their homes since these ceramic tiles are beautiful, durable and enact not require much maintenance. Additional information about Talavera tiles for home number is provided beneath.

History

The Talavera tiles were first produced and used in the town of Talavera de la Reina in Spain blue Mexican tile. The region also had Dutch and Arabic settlers who contributed to the development of the tiles. Tin glazing techniques developed in Italy were used to present the tiles their distinctive milky white finish. Next the Spanish conquest of Mexico, the Spanish monks wanted the churches being constructed to have the Talavera tiles which they were familiar with. Puebla a municipality in Mexico has volcanic deposits and clay which is suitable for making the Talavera tiles. Hence the municipality became noted for the Mexican Talavera tiles.

Making tiles

Though some companies are selling machine made tiles as Talavera tiles, the original Talavera tiles are handmade, using a extended and laborious process. The clay is first soaked in water for several days so that the clay can be kneaded into the appropriate shape. The clay is prick into blocks which are to be converted into tiles, first dried in the dark and then in sunlight. The tiles are then fired in the kiln, glazed by dipping them into the liquid glaze and dried. Next this the tiles are hand painted in the varied patterns, so that each tile is unique. Next this the tiles are again fired in a kiln at a temperature of 1000 degree centigrade.

Number tiles

Since handmade Talavera tiles are expensive, using them on the exterior of the home is an indication of the prosperity of the domestic owner. To make it easier to identify the domestic, Talavera tile are used with the home number. Typically each tile will have a separate number. These tiles are available in varied sizes and patterns. The tiles are defined by the height of the tiles, if the home number is to be visible from a longer distance, the tiles should be larger in size. Depending on the space available for installing the tiles, the domestic owner should order suitable tiles.

Patterns

In addition to the number, each Talavera tile will have a pattern in varied colors talavera Mexican tile. Depending on the design of the home, a suitable pattern should be selected. The blue color pigment used is most expensive, so numerous of the celebrated patterns spend this blue color. Other colors used for the patterns include green, mauve, red and yellow. The tiles can be fixed on the walls using an adhesive or an iron frame for hanging on the wall can be used.

Whether you are looking for interior or exterior sliding door hardware or heavy-duty barn door hardware there are special factors to keep in mind. First off, the type of material used for your door panel has an effect on how it looks and feel when closed, as well how it stands up against rain and snow. There are three main types of materials: wood, steel and aluminum. Each one has its own advantages and disadvantages.
Wooden doors are typically made from wood such as pine, cedar, oak, mahogany, etc., and they may be stained or painted.
Affordable aluminum doors offer an economic solution for energy efficiency. They’re not as heavy-duty, durable, and rugged as steel.
Steel doors are usually made from galvanized steel but can also be stainless steel. The most common style is single hung. They’re made from heavy duty steel so they’ll last for years; they offer some protection against rain and snow; and they’re simple to clean when necessary. They don’t really look like real wood and might need some extra finishing if you want them exactly to match other surfaces in the room.
With door material taken care of, the next step is the actual exterior barn door hardware: Barn Door Hardware Exterior
You might be unsure of what exterior barn door hardware you will go with, and have probably been talking to suppliers, builders, and sub-contractors. With barn trackers and hardware kits having come so far in the past several years, they’ll probably continue to improve even further in the future. If you want to get something stylish but sturdy for your home’s doorway, then you may opt for a modern outdoor barn door.
Hardware comes in various designs and colors so you can choose one that matches the style of decor you want in your house. It’s important to choose the right doors if you want them to last long enough so that they don’t need replacing too soon.
The industrial by design barn door has a track made from solid steel. Barn doors come in different styles, materials, designs, sizes, etc., so there’s no one size fits all when it comes to installing them. Attach the barn door hardware and secure it so that it holds up against the weight of your heavy duty rolling barn door. As explained in www.wboc.com, Investing some extra money for a good quality sliding door hardware kit can help improve the stability of your doors and give them added security.
Consider choosing a door handle for your exterior barn door if you want a unique look.
Users searching exterior barn sliding door hardware will probably have many other questions related to it.
Whether you want a stable barn door or a sliding barn door, the structure differs in both cases.
Sliding barn doors require less space than hinged doors because they don’t need hinges. They’re easier to install too.
Likewise, Specialty Doors offers a stunning assortment of high-quality hardware for outside sliding barn door systems.
Barn door hardware enables you to get a personalized door which becomes an essential component of the area. To buy it, read Exterior Barn Door Hardware